Â鶹¹ÙÍø

FM4 S6E2G series connectivity Arm? Cortex?-M4F microcontroller (MCU)

Up to 180 MHz Arm? Cortex?-M4F-based general purpose MCUs, integrated flash memory, SRAM, and a wealth of built-in peripherals

anchor

Overview

The S6E2G series consists of a maximum of 180 MHz Arm? Cortex?-M4F MCU with 1 MB of flash memory and 64 KB of SRAM, and peripheral functions such as DSTC (Scatter-Gather DMA), CAN, USB, external bus I/F, Ether-MAC, various timers, 12-bit ADCs, I2S, and communication interfaces (UART, CSIO, I2C, and LIN).

Key Features

  • Arm? Cortex? M4F (180 MHz), 8x DMAC
  • 1 MB flash and 196 KB SRAM
  • 256x DSTC (Scatter-Gather DMA)
  • 32x 12-bit ADC
  • 2x MFT, 16x base timer
  • 10x MFS (UART/CSIO/LIN/I2C/I2S)
  • 2x USB 2.0 (Host/Device)
  • 2x QPRC (Quadrature counter)
  • 1x EtherMAC, external bus I/F
  • 1x SD card I/F, 2x CAN
  • 2.7 V-5.5 V, six low-power modes
  • Up to 153 IOs - LQFP

Â鶹¹ÙÍø

About

High-performance MCU subsystem

608 CoreMark?, 180 MHz Arm? Cortex?-M4 CPU

244 ?A/MHz active current with 2.7 V to 5.5 V operating voltage

Up to 1 MB flash and 192 KB SRAM with a 16 KB flash accelerator

Error-correcting code (ECC) support, hardware watchdog timer (WDT), low-voltage detect, and clock supervisor blocks for safety-critical applications

Independent power domains

Digital subsystem

2x Multi-function timers (MFT)

6x Programmable pulse generators (PPG)

16x Base timers, 2x Quadrature position/Revolution counters (QPRC)

1x Dual timer, 1x Cyclical redundancy check (CRC), and 1x watch counter

10x channels of Multi-function serial (MFS) interfaces configurable as SPI, UART, I?C, or LIN

2x USB, 1x CAN, IEEE 1588 Ethernet, 1x SD card interface, 2x Smart card interfaces, I?S and external bus interfaces

Built-in cryptographic assist hardware coprocessor for encryption

Analog subsystem

3x 12-bit, 2-Msps ADC with up to 32-channel multiplexer input

Getting started
  1. Download the S6E2G series datasheet
  2. Purchase the FM4 Starter Kit (FM4-176L-S6E2GM) to evaluate the S6E2G-Series and start development
  3. Download the FM4 Peripheral Driver Library Software
  4. Start your first FM4 designs
  5. Join the Infineon Developer Community

High-performance MCU subsystem

608 CoreMark?, 180 MHz Arm? Cortex?-M4 CPU

244 ?A/MHz active current with 2.7 V to 5.5 V operating voltage

Up to 1 MB flash and 192 KB SRAM with a 16 KB flash accelerator

Error-correcting code (ECC) support, hardware watchdog timer (WDT), low-voltage detect, and clock supervisor blocks for safety-critical applications

Independent power domains

Digital subsystem

2x Multi-function timers (MFT)

6x Programmable pulse generators (PPG)

16x Base timers, 2x Quadrature position/Revolution counters (QPRC)

1x Dual timer, 1x Cyclical redundancy check (CRC), and 1x watch counter

10x channels of Multi-function serial (MFS) interfaces configurable as SPI, UART, I?C, or LIN

2x USB, 1x CAN, IEEE 1588 Ethernet, 1x SD card interface, 2x Smart card interfaces, I?S and external bus interfaces

Built-in cryptographic assist hardware coprocessor for encryption

Analog subsystem

3x 12-bit, 2-Msps ADC with up to 32-channel multiplexer input

Getting started
  1. Download the S6E2G series datasheet
  2. Purchase the FM4 Starter Kit (FM4-176L-S6E2GM) to evaluate the S6E2G-Series and start development
  3. Download the FM4 Peripheral Driver Library Software
  4. Start your first FM4 designs
  5. Join the Infineon Developer Community

Documents

Documents

Design resources

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community ", "labelEn" : "Ask the community " }, { "link" : "none", "label" : "View all discussions ", "labelEn" : "View all discussions " } ] }