Âé¶¹¹ÙÍø

USB EZ-USB? HX3C Blaster Plus Configuration Utility

Blaster Plus: Configuring HX3 with GUI-Based Software

nobutton

About

Blaster Plus is an Infineon GUI-based software tool that configures HX3. Blaster Plus enables the In-System Programming Feature, which programs an external EEPROM connected to HX3/HX3C through USB.

  • Read configuration data from the EEPROM
  • Erase the firmware and configuration data on the EEPROM
  • Program EEPROM with firmware
  • Program EEPROM with configuration data
  • General Settings: Parameters related to enumeration details of HX3/HX3C
  • GPIO control: Parameters to control the default behavior of GPIO pins and status LED pins
  • Charging control: Parameters related to USB Battery charging, Proprietary charging and Ghost charging
  • Power switch settings: Parameters related to HX3 power management controls
  • Port and PHY settings: Parameters related to port specific features such as Shared Link and PHY configuration
  • ?USB descriptors: Parameters related to OEM product descriptor strings

Blaster Plus is an Infineon GUI-based software tool that configures HX3. Blaster Plus enables the In-System Programming Feature, which programs an external EEPROM connected to HX3/HX3C through USB.

  • Read configuration data from the EEPROM
  • Erase the firmware and configuration data on the EEPROM
  • Program EEPROM with firmware
  • Program EEPROM with configuration data

  • General Settings: Parameters related to enumeration details of HX3/HX3C
  • GPIO control: Parameters to control the default behavior of GPIO pins and status LED pins
  • Charging control: Parameters related to USB Battery charging, Proprietary charging and Ghost charging
  • Power switch settings: Parameters related to HX3 power management controls
  • Port and PHY settings: Parameters related to port specific features such as Shared Link and PHY configuration
  • ?USB descriptors: Parameters related to OEM product descriptor strings

Design resources