EZ-PD™ CCG6DF CCG6SF Dual-Single-Port USB-C PD

Overview

EZ-PD? CCG6DF/CCG6SF USB-C power delivery solutions with integrated VBUS provider load switch

EZ-PD? CCG6DF and EZ-PD? CCG6SF are Infineon's dual-port and single-port USB-C and Power Delivery controllers targeting PCs and notebooks. They integrate a VBUS provider path load switch controller along with USB authentication support, VBUS-to-CC short protection, VBUS-to-SBU short protection, 20 V-VBUS regulator, high-voltage NFET gate drivers for VBUS consumer path, SBU pass-through and USB HS mux.

EZ-PD? CCG6DF and EZ-PD? CCG6SF support Dual Role Port (DRP) and fully support the Power Delivery 3.0 specification. They are a programmable solution with 64 KB Flash and 96 KB ROM, supporting fail-safe boot up and firmware upgrade.

Key features

USB Type-C and Power Delivery 3.0 supporting USB3 and USB4, Thunderbolt, DisplayPort Alternate Mode platforms

Integrated digital blocks

Two timers, counters, PWMs, and up to 23 GPIOs
Four SCBs for configurable master/slave I?C, SPI or UAR

Integrated analog blocks

VBUS provider load switch (5 V / 3 A)
Slew rate controlled turn-on on VBUS path
USB PD 3.0 fast role swap support
Integrated high-voltage 20 V-regulator
SBU pass through, USB analog mux
VBUS-to-CC short protection
VBUS-to-SBU short protection
VCONN FETs
High-side current sense amplifier across 5 mohms
High-voltage NFET gate drivers for VBUS consumer path
VBUS discharge NFET

System-level fault protection

Over-current, over-voltage, under-voltage, reverse-current and short-circuit protection on VBUS provider path
VCONN over-current protection
Thermal shutdown

Packages